China Oil Sprayer & Dispenser 3 in 1 Machine for Cakes - Suppliers & Factory Direct Sales
| Running Speed | 15-20 times/min |
| Oil Spraying Quantity | 0.2-6g/time, adjustable |
| Dough Depositing Quantity | 10-100g/time, adjustable |
| Voltage and Frequency | 3 Ph, 380V, 50Hz |
| Power | 11kW |
| Air Pressure | 0.6-0.8MPa |
| Dimension (L*W*H) | 4500*1450*1800mm |
| Maximum Air Consumption | 1.5m³/min (external gas source) |
Fill the container or nozzle part of the oil sprayer, usually the container with lubricant, according to the model and design of the oil sprayer.
According to the size and shape of the cake mold, adjust the spray pattern and spray intensity of the oil sprayer to ensure that the surface of the mold can be evenly coated.
Aim the oil sprayer at the inner surface of the cake mold, keep an appropriate distance, and spray the cooking oil or lubricant evenly. You can rotate or move the mold appropriately to ensure that the lubricant evenly covers the entire inner wall of the mold.
The machine drops the pre-stacked cups from the stack in the set order and accurately places them in the specified position.
Check and adjust: Check the position and stability of all cups and adjust them if necessary.
Put the prepared cake ingredients into the hopper of the molding machine, start the molding process, and ensure that the molding mold is accurately placed and fixed to avoid unnecessary waste and damage.
During the process, closely monitor the equipment's operating status and product quality. Adjust the equipment's operating parameters at any time to ensure that the molded cakes meet quality standards.
The machine operates at a running speed of 15 to 20 times per minute, depending on the product weight and consistency settings.
Yes, both are fully adjustable. The dough depositing quantity can range from 10g to 100g, and the oil spraying quantity can be adjusted between 0.2g and 6g per cycle.
The machine requires a standard 3-phase, 380V, 50Hz power supply, and has a total rated power consumption of 11kW.
Yes, it requires an external air source with a working air pressure of 0.6-0.8MPa and a maximum air consumption rate of 1.5m³/min.
The machine features an automated cup dropping mechanism that accurately feeds and positions pre-stacked cake cups into the mold conveyor system before depositing.