2 in 1 Caf-Oil Sprayer & Depositor Machine for Cake Production - China Suppliers & Factory Equipment
Specification
| Running Speed | 15-25 times/min |
| Oil Spraying Quantity | 0.2-6g/time |
| Dough Depositing Quantity | 10-100g time, adjustable |
| Voltage and Frequency | 3ph, 380V, 50Hz |
| Power | 5.5kW |
| Air Pressure | 0.6-0.8MPa |
| Maximum Air Consumption | 1m³/min (external gas source) |
| Dimension (L*W*H) | 3500*1050*1650mm |
Lubrication and Maintenance
Regularly check the lubricating oil inside the decelerator and the conveyor stepper; supplement with it in time to a certain amount.
Regularly grease the conveyor chains with a little lubricating oil. Grease sliding parts such as the guide rod and the guide sleeve with cooking oil before work so as to ensure their smooth functioning.
Grease the double-body pressure regulating valve with oil and exhaust water in time so as to ensure the normal functioning of pneumatic components.
In order to ensure food hygiene, the machine must be washed and wiped clean before and after use. Do not use metal and thread tools that are prone to be unstitched to clean in case the valve core gets stuck.
Regularly check the fastening bolts of the cam control device to see whether they are loose.
Regularly check whether the sealing washer of the piston inside the ration pump is damaged or worn. If so, replace them in time.
Check on every part of the machine whether there are any bolts loose or falling off. If so, fix them tightly in time.
Frequently Asked Questions
What is the operating speed and power of the machine?
The machine operates at a running speed of 15-25 times per minute and has a power capacity of 5.5kW.
What are the air pressure requirements?
The required air pressure is 0.6-0.8MPa, with a maximum air consumption of 1m³/min from an external gas source.
How should I lubricate the conveyor and sliding parts?
Regularly grease the conveyor chains with a small amount of lubricating oil. For sliding parts like the guide rod and guide sleeve, apply cooking oil before operating the machine to ensure smooth movement.
What precautions should be taken when cleaning the machine?
The machine must be washed and wiped clean before and after use to maintain hygiene. Avoid using metal or fibrous tools that can easily fray or unravel, as loose threads or particles may cause the valve core to get stuck.
How do I maintain the pneumatic components and ration pump?
Lubricate the double-body pressure regulating valve with oil and drain any condensed water promptly. Additionally, regularly check the piston's sealing washer inside the ration pump for wear and replace it if damaged.
What should I check regarding physical fasteners?
Regularly check all parts of the machine, including the cam control device, to ensure that no bolts are loose or falling off. Tighten any loose bolts immediately to prevent operational issues.